Front
Stack
Back
Stack
Air Gap Between
Stacks
Figure 3.24 Stacking Wood
Front
Stack
Back
Stack
Air Gap Between
Stacks
Figure 3.245Stacking Wood
• After about 5 minutes, close and latch the door
completely then push the SBT button again. See
Figure 3.28.
Maximum Heat
Setting the thermostat at a temperature above what the
room will achieve, for example, 90 ° on the thermostat
will cause the appliance to burn continuously on high.
Press the activation button to activate the system and
load fuel.
Medium Burn
•
When away during daytime hours and unattended set
the thermostat to a temperature below what the room
temperature will drop to, for example, 45° and then
program the thermostat to turn back on to a higher
desired temperature (example 75°) after 13 hours. Time
will vary depending on house size. Load fireplace by
referring to the High Burn section.
Figure 3.26 Door Open 1-2 Inches
Figure 3.27 Door Latched Lightly
Figure 3.28 Door Fully Closed
21
Quadra-Fire • Pioneer III Owner’s Manual • 4182-900 • Rev D • 08/19
