January 8, 2016
7080-132J
13
MT. VERNON E2
Saturday and Sunday can be programmed individually
by changing the format from 5-2 to 5-1-1. To change
the format :
1. Press and hold the up button and the center button
until the display changes.
2. Press up or down to change system function num-
ber to 16.
3. Press
NEXT
to advance to next function.
4. Press up or down to change status number to 1.
5. Press
DONE
to exit and save settings.
The thermostat maintains a desired room temperature.
The 5-2 day programmable function allows one program
for week days and a separate program for Saturday/Sun-
day. (Up to 4 periods per day).
Thermostat Controls
Function buttons
Press to select the function
displayed just above each
button. (Functions change
depending on the task.)
Digital display
Temperature buttons
Press up or down to set preferred
temperature.
Hold Button
Press to override
programed tem-
perature control
Program Schedule Override (temporary)
Press or to immediately adjust the temperature. This
will temporarily override the temperature setting for the
current time period.
The new temperature will be maintained only until the next
programmed time period begins. For example, if you want
to turn up the heat early in the morning, it will automatically
be lowered later, when you leave for the day.
To cancel the temporary setting at any time, press
RUN
SCHEDULE.
►
►
Program Schedule Override (permanent)
Press
HOLD
to permanently adjust the temperature. This
will override the temperature settings for all time periods.
The “Hold” feature turns off the program schedule and al-
lows you to adjust the thermostat manually, as needed.
Whatever temperature you set will be maintained 24 hours
a day, until you manually change it, or press
RUN SCHED-
ULE
to cancel “Hold” and resume the prgrammed sched-
ule.
To Adjust Program Schedules
1. Press
SET CLOCK/DAY/SCHEDULE, then SET
SCHEDULE.
2. Press / to set your weekday wake time (Mon-
Fri), then press
NEXT.
3. Press / to set the temperature for this
time period, then press
NEXT.
4. Set time and temperature for the next time period
(Leave). Repeat steps 2 and 3 for each weekday
time period.
5. Press
NEXT
to set weekend time periods (Sat-
Sun), then press
DONE
to save & exit.
NOTE:
You can press
CANCEL PERIOD
to eliminate
unwanted time periods (except Wake).
►
►
►
►
Program Schedule
Pre-set settings are shown below.
You can program 4 time periods each day, with different
settings for weekdays and weekends.
Wake
- Set to time and tempera-
ture you want in the morning
until you leave for the day.
Leave
- Set the time and tem-
perature you want the heat out-
put reduced to during the day.
Return
- Set the time and tem-
perature to what you want the
heat output increased to in the
evening.
Sleep
– Set the time and tem-
perature to what you want for
overnight.
Q. Programming Thermostat
