3
11/23
7094-802E
Approved for ZC fireboxes.
1
1
Important Safety Information
Mode Number:
EXPEDITION-I
Laboratory:
PFS TECO
Report Number:
21-670
Type:
Solid Fuel Type, Listed
Room Heater
Standard:
UL1482, ULC S628 and (UM) 84-
HUD, Mobile Home Approved.
A. Insert Safety Certification
NOTE:
This installation must conform with local codes.
In the absence of local codes you must comply with the
UL1482, (UM) 84-HUD and NPFA211 in the U.S.A. and
the ULC S628-93 and CAN/CSA-B365 Installation
Codes in Canada
.
NOT APPROVED FOR MOBILE
HOME INSTALLATIONS IN CANADA!
C. BTU & Efficiency Specifications
EPA Certification #:
292-21
EPA Certified Emissions:
1.9 grams per hour
*LHV Tested Efficiency:
70%
**HHV Tested Efficiency:
65%
***EPA BTU Output:
23,800 to 27,400 / hr
****Peak BTU/Hour
Output:
37,400
Vent Size:
6 inches
Firebox Size:
1.45 cubic feet
Recommended Wood
Length:
18 inches
Fuel
Seasoned Cord Wood
* Weighted average LHV (Low Heating Value) efficiency
using Douglas Fir dimensional lumber and data collected
during EPA emission tests in accordance with the
requirements of CSA B415.1. LHV assumes the moisture
is already in a vapor state so there is no loss in energy
to vaporize.
** Weighted average HHV (High Heating Value) efficiency
using Douglas Fir dimensional lumber and data collected
during EPA emission tests in accordance with the
requirements of CSA B415.1. HHV includes the energy
required to vaporize the water in the fuel.
*** A range of BTU outputs calculated using HHV Efficiency
and the burn rates from the EPA tests, using Douglas Fir
dimensional lumber.
**** A peak BTU out of the appliance calculated using
the maximum first hour burn rate from the High EPA Test
and BTU content of seasoned cordwood (8600) times
the efficiency.
This wood heater needs periodic inspection and repair for
proper operation. It is against federal regulations to operate
this wood appliance in a manner inconsistent with operating
instructions in this manual.
Model Number:
EXPEDITION-I
Laboratory:
PFS TECO
Report Number:
21-661
Standard:
ASTM E2780-10
Can be found at:
www.quadrafire.com/about-us/epa-certification
B. Insert Emissions Certification
This
EXPEDITION-I is Certified to comply with
2020 crib wood particulate emission standards.