Only use the Power Supply Cord delivered with the Mailing
System.
Connecting the Power Supply starts the software steps for the machine setup.
Remove the Power Supply and power cable from the packaging.
• Plug the male end of the power supply
cord into a wall socket.
• Plug the female connector of the power
supply cord into the bottom back con-
nector of your system.
Plug the female connector of the Power Supply cord into the bottom back connector of your
system.
The machine starts and launches the installation wizard automatically.
b) Configuring installation with an Analog Modem
The installation wizard is going to help you to configure the connection to the server. The
machine automatically detects the connecting device(s) installed.
Note that the installation process restarts from the beginning if power is turned off before
the process is completed.
A moment after powering-up, the control panel of the machine displays the first installation
screen.
21
| Page 21 | nov-12-2012 06:11 |
