• Insert PSD into the Mailing System,
by positioning it vertically, with the
contacts down and facing to the rear,
and the labels towards you.
• Close PSD cover.
• Remove PSD from the packaging.
• Write down PSD No: (N33xxxxxx). You
will need it at step
C
.
A2 – Removing the cardboard wedge
Inside the Mailing System, a cardboard wedge blocks the printing head carriage.
• Remove the foam block.
• Remove the wedge to allow the sys-
tem normal operation.
• Close the Mailing System front cover.
• Open the Mailing System front cover
by pulling it by the upper left corner.
10
| Page 10 | nov-12-2012 06:11 |
