Waterproof Drones - The HexH2O and QuadH2O professional waterproof drones
Waterproof Multirotors
https://www.quadh2o.com
Bond the provided distribution board stand off to the HexH2o (using 5min epoxy), then screw
the distribution board to the stand off using the supplied bolt.
Now its time to fit the ESC’s in place, apply a generous amount of Marine grade sealant around
the base of the heat sink then carefully fit the ESC’s in place ensuring you make a good seal.
Note the direction the ESC’s are facing (2 facing forward, one facing back). This will make it
easier to connect the motor cables later on.
23 / 30