Waterproof Drones - The HexH2O and QuadH2O professional waterproof drones
Waterproof Multirotors
https://www.quadh2o.com
Using a soldering iron, join the extended cables to your motor. On our RTF builds we also use hot
glue under the heat shrink to give extra protection to the join in the cables.
Then carefully pull the cable back through from the inside of the hull and fit your motor mount to
the arm and then your motor/motor mount carbon top plate to the motor mount (don’t forget
thread lock).
9. Video Transmitter / SMA Lead
If you are using a video transmitter for a downlink, you will need to connect this to the power on
your electrics tray, or power distribution board, and connect the video link to your Gopro, gimbal or
OSD (depending on your setup).
In the picture below you can see we have mounted the VTX (away from the other components) to
the HexH2o using velcro. You can also fit it with the provided heat sink.
18 / 30
