Waterproof Drones - The HexH2O and QuadH2O professional waterproof drones
Waterproof Multirotors
https://www.quadh2o.com
Carefully fit the 6 larger motor cable grommets into the pre-drilled holes in the top of the hull, then
fit the 2 remaining smaller grommets into the pre-cut breather tube holes (see picture).
Now fit the provided breather tubes through the breather tube grommets (leave approximately 4?
sticking out). These can be kept in place inside the hull using two or the provided cable tie clips.
Ensure the end of the tube is close to the bottom of the HexH2o (see picture).
10 / 30
