INSTALLATION
Suspended Tile Ceilings
Step 1
Carefully unpack the contents of the box and ensure that all parts
are accounted for before beginning installation.
Step
Remove the tile from the ceiling and place it on a suitable work
surface to cut the hole and assemble the speaker. Locate the
cardboard mounting template and use it to mark the hole size
needed for the installation. Center the template on the ceiling tile
and cut the hole using a suitable saw, or knife.
Step
Once the hole is cut, rest the speaker face-down on the work
surface and place the cut ceiling tile over top of the assembly,
ensuring the tile is resting on the speaker bezel.
Step
Place the mounting rails on the ceiling tile on either side of the
speaker assembly ensuring that they are oriented correctly to
provide support by resting on the tile mounting grid when installed
in the ceiling
Step
Place the C ring over top of the speaker assembly and align it with
the mounting rails. Using the supplied screws, fasten the C ring to
the mounting rails.
Step 6
Lift the assembly to gain access to the front of the speaker, then
using a screwdriver tighten each of the four mounting screws in
sequence. Turning the screws in a clockwise direction will cause
the mounting clamps to rotate into position then extend down to
clamp the assembly to the ceiling tile.
STEP 3
STEP 6
