background image

SAFETY INSTRUCTIONS

Safety First!

 

1.

  Please read this manual fully before installing and operating this  

    product.

 

2. 

Retain a copy of this manual for future reference.

 

3.

  Comply with all warning labels and instructions.

 

4.

  Do not attempt the installation of this equipment unless you are  

    qualified to do so.

 

5.

  Protect your hearing from high sound pressure levels.

Rigging and Suspension

The rigging, suspension or mounting of these products can expose the 

installer and members of the public to serious health risks and even death.

UNDER  NO  CIRCUMSTANCES  ATTEMPT  TO  RIG,  SUSPEND  
OR OTHERWISE MOUNT THIS EQUIPMENT UNLESS YOU ARE 
FULLY  QUALIFIED  AND  CERTIFIED  TO  DO  SO  BY  RELEVANT  
LOCAL,  STATE  AND  NATIONAL  AUTHORITIES.  ALL  RELEVANT 
SAFETY REGULATIONS MUST BE FOLLOWED. IF YOU ARE NOT 
PROPERLY  QUALIFIED  OR  DO  NOT  KNOW  OF  PERTINENT  
REGULATIONS, CONSULT QUALIFIED PERSONNEL FOR ADVICE 
AND ASSISTANCE.

Limited Liability

QUAD Industrial assumes no liability whatsoever for any damage or loss, 

either direct or consequential arising from the installation and use of these 

products. Liability is limited to replacement of product or refund, at the 

QUAD Industrial’s discretion. Your rights to compensation may vary by ter-

ritory; consult with your local QUAD Industrial office or distributor. 

Warranty & Service

These products are designed to be used as specified, and are warranted to 

be free from defects in materials or workmanship. Warranty terms and con-

ditions vary by territory. Please contact your local QUAD Industrial sales 

office or distributor for complete details. Under no circumstances should 

you attempt to repair these products. Doing so may limit or void warranty 

coverage.

TABLE OF CONTENTS

Introduction:

Safety Instructions ....................................................................... 02
Warnings & Disclaimers .............................................................. 02
Rigging & Suspension ................................................................. 02
Warranty & Service .................................................................... 02

Product Descriptions:

C4, C4-16, C4-T, C6, C8, & CSUB .............................................. 03

Product Features:

Product Diagram ........................................................................ 04
Components ............................................................................... 05
Dimension Drawings ................................................................... 06

Installation - Suspended Tile Ceilings:

Installation Instructions ................................................................. 07

Installation - Hard Ceilings:

Installation Instructions ................................................................. 09

Connections:

Input Connectors ......................................................................... 11
Number of Speakers Calculation .................................................. 11
Reccomended Wiring Scheme ...................................................... 11

CE Compliance:

Statement ................................................................................... 12

Product Specifications

Specifications ............................................................................. 13

Contact Information:

QUAD Industrial Contact Information ............................BACK COVER

Summary of Contents for C4 - REV 1















Reviews: