4
Installation
To install, locate 14 HP of space in your Eurorack case and confirm the positive 12
volts and negative 12 volts sides of the power distribution lines. Plug the connector
into the power distribution board of your case, keeping in mind that the red band
corresponds to negative 12 volts. In most systems, the negative 12 volt supply line is
at the bottom. The power cable should be connected to the Chance with the red band
facing the bottom of the module.
Specifications
Format:
14 HP Eurorack module
Depth:
34mm (Skiff Friendly)
Max Current:
+12V = 45mA
-12V = 17mA
