Flange
1a. Global Wet/Dry Mix –
Global Wet/Dry Mix control for Reverb.
If the Mix knob is far left, then audio will be completely dry. If the Mix knob is far right,
then audio will be completely wet.
1b. Global Wet/Dry Mix CV In –
Unipolar Positive control voltage input for Global
Dry/Wet Mix. Control voltage is added to the current pot position. Range is 0V – 5V.
2a. Reverb Amount –
Control for Reverb Amount.
If the Reverb Amount knob is far left, then the signal will be completely dry of Reverb.
If the Reverb Amount knob is far right, then the signal will be completely wet with
Reverb.
2b. Reverb Amount CV In –
Unipolar Positive control voltage input for Reverb
Amount. Control voltage is added to the current pot position. Range is 0V – 5V.
3a. Flange Rate –
Control for Flange Rate.
If the Flange Rate knob is far left, then it will be as slow as possible. If the Flange Rate
knob is far right, then it will be as fast as possible.
3b. Flange Rate CV In –
Unipolar Positive control voltage input for Flange Rate.
Control voltage is added to the current pot position. Range is 0V – 5V.
4a. Flange Amount (Depth) –
Control for Flange Amount.
If the Flange Amount knob is far left, then the flanging will be as narrow as possible. If
the Flange Amount knob is far right, then the flanging will be as wide as possible.
4b. Flange Amount (Depth) CV In –
Unipolar Positive control voltage input for Flange
Amount. Control voltage is added to the current pot position. Range is 0V – 5V.
10
