Description
Module Installation
To install, locate 12HP of space in your Eurorack case
and confirm the positive 12 volts and negative 12
volts sides of the power distribution lines.
Plug the connector into your case’s power supply
unit, keeping in mind that the red band corresponds
to negative 12 volts. In most systems, the negative 12
volt supply line is at the bottom.
The power cable should be connected to the module
with the red band facing the bottom of the module.
Data Bender is a circuit bent digital audio buffer. It is inspired by the ways in which audio equipment can
fail. The sounds of skipping CDs, software bugs, and defective tape machine playback are all accessible.
The 96kHz, 24-bit audio buffer can hold over a minute of stereo audio, providing a sonic canvas capable
of infinite surprises and discovery.
• Circuit bent digital audio buffer
• Skipping CDs, software bugs, old tape machine, scratched records
• 96kHz sample rate, 24-bit depth for high fidelity audio with over a minute of stereo sampling time
• Stereo IO
Tech Specs
Width: 14HP
Depth: 28mm
Power Consumption: +12V=58mA, -12V=60mA, +5V=0mA
2
