![background image](http://html1.mh-extra.com/html/qu-bit-electronix/bloom/bloom_manual_3337097011.webp)
The LEDs will display the number of paths, and the end color when the knob is touched.
-5V to +5V CV input added to knob position.
CV only changes the currently selected channel.
3. Branches
Sets the number of branches to follow the “Trunk” sequence.
When all the way down, only the “Trunk” sequence will play.
When all the way up, the “Trunk” Sequence, and 7 related subsequences of the same length
will extend the sequence.
The LEDs will change color to indicate that the Bloom is in one of the branches instead of
the “Trunk” sequence.
Channel 1 blends from blue to gold across the branches.
Channel 2 blends from green to purple across the branches.
The LEDs will display the number of branches, and their colors when the knob is touched.
-5V to +5V CV input added to knob position.
CV only changes the currently selected channel.
4. Mutation
Controls the amount of variation introduced into the trunk sequence.
This is a destructive control that replaces the manually programmed sequence.
To undo the effects of mutation, press Reset while holding Shift to revert to the last manually
edited sequence values.
When all the way down, the sequence is locked to the programmed notes.
When all the way up, every step of the sequence will be regenerated.
The LEDs will display the amount of mutation when the knob is touched.
This control only changes the notes of the trunk. It will not toggle gate-states or change
other settings like slew or ratchets.
11