160.488UK User Manual
If the display is showing the DMX address, the VAPYR-900 will operate from DMX
control as follows.
Specifications
Power supply
220-240Vac, 50Hz (IEC)
Power consumption
900W
Fuse
F5AL
Fluid capacity
1.2 litres
Warm up time
30-40 seconds
Haze output (approx.)
5000 cu ft (142m³) /min
Connections
DMX in and out (3-pin XLR), Remote (5-pin DIN), IEC
Controller
Onboard digital control panel, timer remote or DMX512
DMX channels
2
Dimensions
305 x 300 x 225mm
Weight
4.75kg
Troubleshooting
Warning: Hot components! ... Switch off and allow to cool before touching the unit.
No light on mains
switch or remote
Check mains voltage is correct and socket is switched on
Check IEC lead is OK and connected properly
Check mains fuse in IEC connector and fuse in plug top
If fuse blowing repeatedly, refer to qualified service personnel
Green light is on but
no haze output on
manual or
continuous mode
Check fluid level in tank
If fluid is OK and pump working, the lines may be blocked
Check that output is not set to zero on the control panel or remote
If blocked, clean with fog machine cleaner & distilled water
Check that if DMX mode is selected, the DMX channel is correct
In DMX mode, check that haze output is not set to zero
Disposal:
The “Crossed Wheelie Bin” symbol on the product means that the product is classed as Electrical or
Electronic equipment and should not be disposed with other household or commercial waste at the end of its
useful life. The goods must be disposed of according to your local council guidelines
Errors and omissions excepted.
Copyright© 2019. AVSL Goup Ltd
Channel 1 (start address)
0
Off
1-255
Haze output 1-100%
Channel 2 (start a 1)
0-255
Fan speed slow to fast
Summary of Contents for VAPYR-900
Page 6: ...160 488UK User Manual...
