SmartLIGHT User Manual Page 4
CAUTION! TO PREVENT MORTAL ELECTRICAL RISK AND LONG LIFE OPERATION:
For your safety, please kindly pay attention to all of the warnings listed below:
Always plug in the power plug last and disconnect from the mains, when the
device is not in use or before cleaning.
Do not install and operate the device in rain or extreme heat, moisture or dusty
environments.
This device is for indoor use only and in a dry environment.
Do not switch on immediately but wait until it reaches to room temperature, if
the device has been exposed to drastic temperature fluctuations.
Do not shake the device and avoid brute force when installing or operating.
Do not spread a fog or bubble effect machine directly at the device.
Do not use the device during thunderstorms. Disconnect the power.
Do not use solvents or aggressive detergent to clean the device. Use a soft and
clean cloth.
Do not modify the device or the power cord in anyway.
Use appropriate safety-rope for added safety.
Do not stare to the light.
The symbol
determines the minimum distance from lighted objects. The
minimum distance between light-output and the illuminated surface must be
more than 0.5m.
SmartLIGHT User Manual Page 9
CONTROL DISPLAY:
1.
MODE\ESC: Menu or withdraw the last menu
2.
UP: Increase one step each time
3.
DOWN: Decrease one step each time
4.
ENTER: Confirms the functions you select
*Note the display will turn off if no activity for 20 seconds.
PRIMARY FUNCTION:
LED Display
Action
A001 - A512
DMX-512 Address from 1 to 512
Er_L
If there is a breakdown in the DMX connection
AUT0
Auto Fade in and fade out
SOU1
Sound to light strobe
SOU2
Sound to light pulse strobe
L 25
Brightness = 25% of full potential
L 50
Brightness = 50% of full potential
L 75
Brightness = 75% of full potential
L100
Brightness = 100% of full potential
