2.
If liquids are spilled on areas other than inside the fluid tank, disconnect the mains,
allow the unit to dry out and have it checked by qualified personnel before further
use.
3.
Avoid any impact, dropping or extreme pressure to the housing.
4.
No user serviceable parts inside - do not open the case.
5.
Allow the unit to acclimatise to room temperature before operating.
6.
The HZ-800 has a built-in fluid container and should be operated in an upright
position. Ensure that the unit is positioned on a stable, non-slip surface.
Safety and Cleaning:
1.
Check for correct mains voltage and condition of IEC lead before connecting to mains.
2.
This unit must be earthed.
3.
This unit uses a heating element
–
be aware that parts of the housing may be hot
during use!
4.
Use a soft dry or slightly damp cloth to clean the casing.
5.
Do not use strong solvents for cleaning the housing.
6.
Clean the haze mechanism periodically by operating with distilled water instead of
haze.
7.
It is also recommended to use fog machine cleaning fluid (160.670UK) periodically.
Recommended Fluids:
For the HZ-800 haze machine, we strongly recommend the following fluid which has been
specifically formulated to perform best with any heater-based haze machines.
QTX ref code
Description
Size
160.591UK
High quality professional haze fluid
5 Litre
160.596UK
Eco haze fluid
5 Litre
Rear Panel:
