154.324UK User Manual
Onboard Menu
Display
Value
Description
xxx
-
DMX start address
xx
Static red
Static green
Static blue
Static white
Static yellow (R+G)
Static cyan (G+B)
Static purple (R+B)
Static flood (R+G+B+W)
8 colour jump
Colour scroll
Sound activated colour jump
Sound activated colour strobe
xx
No strobe
-
Au09 - Au10 strobe slow to fast
xx
-
Au09 - Au10 speed slow to fast
xxx
-
Manual colour red level 0-100%
xxx
-
Manual colour green level 0-100%
xxx
-
Manual colour blue level 0-100%
xxx
-
Manual colour white level 0-100%
Standalone operation
To operate the HIPAR-120 in standalone (autonomous) mode, choose any of the settings other than DMX.
Auto, sound-activated, strobe and manual colour modes described above will operate without DMX control.
To control further HIPAR cans in master-slave mode, connect the DMX through from a master HIPAR-120 in
standalone mode to the DMX input of a
“
slave
”
HIPAR can that is set to DMX mode with address
.
Further HIPAR cans set to
may be connected from DMX through to DMX input in a daisy chain.
Auto programs
to
are static preset colours.
is an 8-colur jump sequence and
is a colour scroll, both controlled by
-
speed setting.
If the strobe setting is
-
, a flashing strobe effect will be applied to the Auto program (slow to fast)
is a sound activated 8 colour jump sequence and
is a sound activated colour strobe effect.
Adjusting the values of
xxx,
xxx,
xxx and
xxx gives a manual colour mix for a custom static colour.