154.013UK User Manual
Rear Panel
Powering up
The B12P is fitted with an internal rechargeable battery, which when charged will operate
the B12P for up to 4 hours without connection to external power.The B12P is also supplied
with a DC power adaptor which connects to the unit via a DC jack on the rear panel (1).
This adaptor should be plugged into a suitable mains outlet, ensuring the correct voltage is
supplied. This adaptor has the capacity to power the unit for standalone or DMX operation
and when the B12P is switched off, it will charge the internal battery.
Internal Settings
Using the menu buttons (6) the B12P can be set to run in various modes.
These are outlined in the table below.
Function
Display Press Up/Down
Press Enter + Up/Down
DMX address setting
.
.
-
.
DMX start address
IP slave ID setting
.
.
-
.
Auto 1 static colours
.
.
-
.
Colours setting
Auto 2 colour change
.
-
.
Speed setting
Auto 3 fade programs
.
.
-
.
Colours setting
.
-
.
(flashing)
Speed setting
Auto 4 sound-activated
.
.
-
.
Sequence setting
.
-
.
(flashing)
Mic. sensitivity
Auto 5 strobe programs
.
.
-
.
Colours setting
.
-
.
(flashing)
Speed setting
Red custom level
.
.
-
.
Static Red level 0-100%
Green custom level
.
.
-
.
Static Green level 0-100%
Blue custom level
.
.
-
.
Static Blue level 0-100%
White custom level
.
.
-
.
Static White level 0-100%
1
DC power in jack
2
DMX input XLR
3
LED display
4
Power on/off button
5
DMX output XLR
6
Menu buttons
