QSW-6300 Series Switches Hardware Installation and Reference Guide
Verifying Operating Status
35
Figure 4-2
3. In the Connectivity Note window, enter the name of the new connection and click
OK
.
A window appears as shown in Figure 4-3. In the Connect Using field, select the serial
port you want to use.
Figure 4-3
4. After selecting the serial port, click
OK
. The Serial Port Parameter Setting window is
displayed, as shown in Figure 4 4. Set the baud rate to 9600, data bit to 8, parity check
to none, stop bit to 1, and flow control to none.
