QTECH
Software Configuration Manual
16-208
Administrator can manage himself; for example, change his own privilege and password. It cannot create or delete other users and
change other user’s password and privilege.
This chapter contains following sections :
Ø
System default user
Ø
User’s authentication
Ø
Add users
Ø
Change password
Ø
Modify User's Privilege Level
Ø
Delete User
Ø
Show users
Ø
Configure RADIUS to be remote authentication server
Ø
Configure remote authentication
16.3.1
System default user
There is an internal username with password called Super-administrator. It processes the superior priority in the
switch to manage both the users and the switch.
The username of Super-administrator is
admin
and its initial password is
123456
. It is suggested modifying the
password after the initial-logging in. This username and its administrator privilege cannot be deleted and modified.
&
Note :
There must be only one super-administrator and all the configurations in the manual is setting super-administrator as example.
16.3.2
User’s authentication
User’s authentication can be divided into local authentication and remote authentication :
Local authentication : The users’ account and password are saved in local database. All users are supported by local
authentication.
Remote authentication : The users’ account and password are saved in RADIUS/ server.
Super-administrator “admin” is not supported by remote authentication.
16.4 Local authentication configuration
16.4.1
Add users
At most 15 users can be added. Log in the switch first as Super-administrator and create new users as following steps
:
Step
Command
Description
1
enable
Enter privileged mode
2
config terminal
Enter global configuration mode
3
username
username
privilege
privilege
<0,1>
password
password
Adding a new user and specified the
privilege.
4
show username
Check the configuration.
