Installation Manual
4. Power on and Run Router
41
www.qtech.ru
The configuration cable is connected correctly; the PC for configuration is enabled; the
setting of the terminal parameters is complete.
Before the router is powered on, confirm the position of the power router
of the equipment room where the router is located, so as to cut off the
power in time when there is an accident.
Power on Router
Power on the router in the following order:
Enable the power supply switch of the router.
Enable the power switch of the router.
4.4.1.
Check after Power on
Power on the router. After loading all cards, check as follows to ensure that the later
configuration work can be done normally:
After the router is powered on, the ventilation system works, and check whether there is
the sound of the fan rotation and whether there is air discharged from the ventilation holes
of the router.
View whether the indicators on the router are normal.
Table 4-1 The indicator status when the router works normally
Indicator Name
Indicator Color
Description
SYS
Green
Quickly flash: indicates that the board is in
bootloader loading or IOS loading state
(flash frequency 5Hz)
on: the status before IOS loading and after
bootloader starts successfully
Slowly flash: IOS loaded successfully
(frequency 0.5Hz)
off: not powered on
PWR, P1, P2
Green
On: Indicate that the system power status
is normal
FAN
Green
On: Indicates that the system fan status is
normal
