25
LAPBELT ANCHORAGES – SEPARATE LAPBELT (MANUAL) WITH TRACK FITTINGS.
28. If a separate lap and shoulder belts is required, Q’straint recommends using a lapbelt that connects to the rear
tiedown. This will ensure the lapbelt angles are within the recommended zones.
29. Seperate lapbelt anchorages may be placed:
- to the side of the wheelchair tiedowns as shown in HH position (2) or
- behind the rear tiedowns as shown in HH position (1)
Lapbelt anchorages should be position to ensure the lapbelt angle falls within the zones shown in (EE)
SHOULDER AND LAP BELT INSTALLATION
Wall
2” (51mm) Min
Min. 330mm
48” (1220mm) - 54” (1520mm)
27” (685mm) - 34” (865mm)
Shoulder Belt Retractor
Floor Anchorage
HH
Layout for separate lapbelt anchorages- LAPBELTS WITH TRACK FITTINGS ONLY
1
1
2
2
Lapbelt Anchorage
Location(s) (1) or (2)
