The Qstik EVOQ user guide
wiTH A mOBiLE pHONE
START WITH YOUR EVOQ POWERED OFF.
1.
Press and hold the function button for
four seconds until it flashes blue and green
repeatedly in pairing mode. You have
approximately three minutes to complete
the pairing process.
2.
You now need to set your mobile phone to find
and pair with your EVOQ. For full instructions
on how to do this, refer to your mobile phone
user guide. It can normally be done via the
“Bluetooth”, “Setup” or “Connect” menu.
3.
Your phone should now find your EVOQ and
display the name “EVOQ_VQ360”. Select your
EVOQ and confirm your selection.
4.
If asked for a PIN or password, enter “0000”.
5.
If successful, the status indicator light will
only flash blue every five seconds, indicating
“ready-to-use” mode.
Pairing
Fitting
Using
NAME AS
IT WILL
APPEAR
NAME AS IT
WILL APPEAR
Note:
you can also put your EVOQ into pairing mode when it
is already powered on. Press and hold the main function button
AND the (+) button for three seconds until the status indicator
light flashes blue and green repeatedly.
14
Getting to know it
Getting technical
Getting connected
Getting the best
Getting problems?
Getting legal
