6
QS-Pro
11/2014
QS-Pro
Swit ching paper shredder off
• Set mains switch at rear of paper
shredder to „0“.
Destroying credit cards, CDs, discs or
DAT cassettes:
Cross cut machines:
Fold the safety element down, switch the
machine on to continuous operation and
feed the material into the insertion slot.
only for cutting type
3.9x50 mm
DAT cassettes
Pa per jam
You have fed in too much paper.
Paper shredder jammed.
Red LED in the key pad
fl
ashes.
Paper shredder reverses auto-
matically.
Notice!
Do
not
press dashed arrow button and
green arrow button alternately forwards and
backwards. Cutting unit can be damaged.
• Pull paper out of the paper feed-
ing opening.
If material is not completely pushed
out, then
• Press dashed arrow button.
Paper is pushed out.
• Pull paper out.
• Separate paper stack
• Feed in pa per successively.
Electric motor overheated
Red LED on membrane key-
board lights.
Paper shredder switches off au-
tomatically.
• Allow paper shredder to cool
down for approx. 15 to 20 min.
Front door is open
Red LED on membrane key-
board lights.
Paper shredder stops automati-
cally.
• Close front door.
Note
If the door is opened when the
cutting device is running, the document
shredder must be started again using the
green button after the door of the document
shredder has been closed.
7 Troubleshooting
Destroying USB sticks
Insert USB sticks in the centre of the paper
feed.
