Revision A—31 August 2018
© 2018 QSC, LLC. All rights reserved. QSC, and the QSC logo are registered
trademarks in the U.S. Patent and Trademark Office and other countries. #44 V.6
qsc.com
QSC Product Series
Technical Notes
TouchMix Series digital mixers
5. At
Network Type:
select
Wired
(Figure 2). At
Wired
Network Settings
select
Auto IP Address (DHCP)
. Touch
Apply
.
6. Once the mixer establishes an Ethernet connection with the
router, the mixer touchscren will display the prompt
Wired
Ethernet connection operational
and at
Connection
Status:
it will say
Connected
.
7. In the Wi-Fi settings of your iOS or Android device, locate the
router and connect to it (most Wi-Fi routers have a factory-as-
signed default network name and password, which can usually
be found on a sticker on the router or in the user manual).
8. When your device has connected successfully to the router,
launch the app.
— Figure 2 —
9. If
Disconnected
appears in red in the upper right corner of the app, touch
Menu
and then
Network
. Select your mixer from the
Found Mixers
list and touch
Select
. Your device is now connected to the mixer.
Configuring access
If this is the first time the device has been connected to the mixer, the mixer must give it remote access permissions. To do this, press the
Menu
button on the mixer. Select
Remote Control
. In
Devices
, select your device and the use the
Access Control
switches to assign
to it the various remote control functions available.
