5
Freestanding Installation
1. Attach the rubber feet with the included
screws (Figure 3).
2. Bend down the feet to pull off the protective
film and affix the feet to the soundbar (Figure
4).
3. Place the soundbar on a table or credenza.
4. Connect a network cable to the Q-LAN/PoE
port at the back of the soundbar.
5. Connect the the other end of the network
cable to a PoE+ switch.
— Figure 3 —
— Figure 4 —
Permanent Installation
IMPORTANT!
Mount to a surface capable of supporting the weight of the soundbar.
WARNING
: Install the system in accordance with local building codes and regulations. Use a licensed contractor or professional
engineer. QSC, LLC is not responsible for damages resulting from the negligent installation of any bracket or loudspeaker.
Wall Mount Bracket Features
Refer to Figure 6.
1.
Release Latches
2.
Safety Locking Screws
(both sides)
3.
Cable Pass Notch
— Figure 5 —
Soundbar Mounting Features
Refer to Figure 5.
1.
Hanging Bracket Bosses
2.
Wall Bracket Bars
3.
Adjustment Nut
1
2
3
1
2
3
— Figure 6 —
