10
EN
Backup 2-Channel Amplifi er Connections
Backup 2-Channel Amplifi er DataPort Connections
To attach a backup 2-channel amplifi er to the DAB-801, connect a male to male QSC DataPort cable from the HD-15 connector labeled “Backup
Amplifi er DataPorts” on the DAB-801 to the HD-15 DataPort connector on the amplifi er.
Primary and backup amplifi ers must be of the same type and channel count.
It is mandatory that the backup DataPort labeled “X” on the DAB-801 be used for this.
Backup 2-Channel Amplifi er Output Connections
Wire the outputs of the backup amplifi er to the green detachable terminal block labeled “Connect to Backup Amplifi er” on the DAB-801. The output of
backup amplifi er “X” should connect to the section of detachable terminal block that is labeled “X.”
Backup speaker connections “Y“ should be left open.
