![background image](http://html1.mh-extra.com/html/qsc/la108-af/la108-af_quick-start-manual_3323508009.webp)
9
Stack Adapter Kit Storage
1. Stack Adapter Kits may be configured for storage inside of the Array Frame when not in use.
2. Carefully remove paper backing from the adhesive sides of the rubber pads. Adhere rubber pads to the Array Frame as shown.
(See — Figure 22 —)
3. Store the Angle Arms from the Stack Adapter Kit inside the Array Frame using the Angle Arm Rigging Pins and the Array Frame
Rigging Pins to secure them in place.(See — Figure 23 —)
4. Store the Tie-Down Assembly using the Tie-Down Knob in one of the two designated locations as shown. (See — Figure 24 —)
NOTE:
Array Frame can be flown with Sub Stack Adapter parts safely stored as instructed.
Rubber Pad
Rubber Pad
Angle Arm
Rigging Pin
Array Frame
Rigging Pin
— Figure 22 —
— Figure 23 —
Tie-Down
Assembly
Tie-Down
Knob
— Figure 24 —