8
TD-001536-01-A
Pole-mounting Loudspeakers Over the KS212C
The KS212C is equipped with two 35 mm M20 pole
sockets, one on the top, and one on the side for pole-
mounting a loudspeaker over the unit.
Figure 5 shows a KS212C in a vertical orientation with
a K.2 Series loudspeaker mounted above.
Figure 6 shows a KS212C in a horizontal orientation
with a K.2 Series loudspeaker mounted above.
Use the table below to determine which poles you can
use with the various K and K.2 Series loudspeakers
when mounting over the KS212C in a horizontal or
vertical orientation.
KS212C
K8/.2
K10/.2
K12/.2
KW122
KW152
KW153
1 x KLA12
2 x KLA12
Horizontal 16” Pole
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Horizontal 26” Pole
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Horizontal 36” Pole
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Vertical 16” Pole
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
Vertical 26” Pole
Yes
Yes
Yes
Yes
Yes
No
Yes
No
Vertical 36” Pole
Yes
Yes
Yes
Yes
No
No
No
No
WARNING!:
The KS212C Subwoofer is not intended or equipped for suspension. Do not suspend the unit.
Cooling
This is a powered loudspeaker containing an internal power amplifier that produces heat. Allow a minimum of 50 cm
(20 in) clearance around the cabinet for convection cooling. Keep anything that might restrict airflow away from the rear of
the enclosure (i.e draperies, walls, etc.)
CAUTION!:
Do not install enclosures with their rear panels exposed to direct sunlight. Direct sunlight will
heat the amplifier module and reduce its ability to produce full output. Install sunshades if needed. Maximum
ambient temperature for full performance to specification is 50° C (122° F). Do not install enclosures where
exposed to rain or other water sources. The enclosure is not weatherproof. Outdoor installations must provide
protection from the elements.
— Figure 5 —
— Figure 6 —
