24
Audio signals are input to the DCM via the FROM
PROCESSOR OUTPUT connection. This DB25-type
connection conforms to cinema industry standard pinout.
Most common cinema processors use this DB25 connec-
tion standard, making connection to the DCM simple.
Orient the DB25-type connector properly, push gently to
seat the pins, then finger-tighten the retaining screws.
Cinema processors that do not use standard DB25-type connection typically have adapter cables available.
Check with the processor manufacturer. We recommended that you purchase a standard 25-pin cable from
any of the well known cinema industry cable suppliers.
CINEMA PROCESSOR CONNECTION
INSTALLATION-
Connections: Cinema Processor
Configuration:
25-pin SubD male to 25-pin SubD
male.
Pin #
Signal Description
1
Chassis Ground
2
Left +
3
Left Center -
4
Chassis Ground
5
6
Right Center -
7
Chassis Ground
8
Right +
9
Chassis Ground
10
Surround Left -
11
Surround Right -
12
Subwoofer -
13
Chassis Ground
14
Left -
15
Chassis Ground
16
Left
17
Center -
18
Chassis Ground
19
Right
20
Right -
21
(not used)
22
Chassis Ground
23
Surround Left +
24
Surround Right +
25
Sub
FROM PROCESSOR OUT Pinout-
