QSC CMX500V, User Manual, Page: 11 / 100

9 10
Specifications
CMX
300V
CMX
500V
CMX
800V
Stereo Mode (Both Channels Driven)
70 Volt - - 400 W
100 Volt - - -
Bridge Mono Mode
70 Volt 600 W 1200 W 2000 W
100 Volt - 600 W 2300 W
– Figure 19 –
Distributed Constant Voltage Outputs
70 Volt Operation:
The CMX 300V and 500V must be configured for Bridge Mono mode for 70
Volt operation. Please refer to the above section on Bridge Mono mode for
proper setup configuration.
The CMX 800V can operate in 70 Volt operation in Stereo mode or Bridge
Mono mode.
100 Volt Operation:
The CMX 500V and CMX 800V must be configured for Bridge Mono mode for
100 Volt operation. Please refer to the Bridge Mono mode section for proper
setup configuration.
– Table 2 –
Channel 1
input
Channel 2
input
not used
Can be used to Daisy-chain
additional amplifiers
Amplifier #2 input
Channel 1
signal input
Channel 2
No input!