background image

Attero Tech by QSC

 unBT2A 

User Manual 

 

 QSC, LLC 2020 

 

614-00034 

 

WARRANTY INFORMATION 

 
 

For a copy of the QSC Limited Warranty, visit the QSC website at 

www.qsc.com

 

 

 

Note: This equipment has been tested and found to comply with the limits for a Class A 

digital  device,  pursuant  to  Part  15  of  the  FCC  Rules  and  EN55022.  These  limits  are 

designed  to  provide  reasonable  protection  against  harmful  interference  when  the 

equipment  is  operated  in  a  commercial  environment.  This  equipment  generates,  uses, 

and can radiate radio frequency energy and, if not installed and used in accordance with 

the  instruction  manual,  may  cause  harmful  interference  to  radio  communications. 

Operation of this equipment in a residential area is likely to cause harmful interference, 

in which case the user will be required to correct the interference at their own expense. 

 

 
 

 
This symbol means the product must not be discarded as household waste, and should be delivered to an 

appropriate collection facility for recycling. Proper disposal and recycling helps protect natural resources, 
human health and the environment. For more information on disposal and recycling of this product, contact 

your local municipality, disposal service, or the business where you bought this product. 

 

 

Summary of Contents for ATTEROTECH unBT2A

















Reviews: