QSC AD-S282H User Manual Download Page 9

Page: 9 / 16

Specifications- AD-S282H and I-282H with Recommended Signal Processing

Low Frequency Drivers (parallel)

High Frequency Driver

Frequency Range:

70- 2.1k Hz (-6 dB, free field response)

2.1k- 24.0k Hz (-6 dB, free field response)

60- 2.7k Hz (-10 dB, free field response)

1.9k- 24.0k Hz (-10 dB, free field response)

Power Rating:

400W

(8 hrs., IEC268-5, 50- 2.0k Hz, 6dB crest factor)

50W (

8 hrs., IEC268-5, 1.0k- 20.0k Hz, 6dB crest factor)

Recommended Amp Power:

800W

100W

Nominal Coverage:

90° horizontal x 60° vertical with waveguide as installed at factory

Physical Specifications

Weight:

I-282H:

28.5 lb. net, 36.8 lb. shipping (12.9 kg., 16.7 kg.)

AD-S282H:

27.7 lb. net, 35.6 lb. shipping (12.6 kg., 16.1 kg.)

AD-S282HT:

32.9 lb. net, 40.8 lb. shipping (14.9 kg., 18.5 kg.)

Enclosure and Grill:

painted high impact polystyrene, removable aluminum grill

Controls

AD-S282HT:

rotary tap selector switch

AD-S282H and I-282H:

Active / Passive mode selector rotary switch

Connectors:

I-282H-

2 NL4 Speakons wired in parallel

AD-S282H-

barrier strip screw terminals, 1 set used for passive, 2 sets used for bi-amp

AD-S282HT-

barrier strip screw terminals, 2 sets wired in parallel

Mounting Hardware:

All models-

yoke mount with retaining knobs

I-282H-

includes swivel outrigger feet, retaining knobs, and rubber feet, integral pole cup accepts

1.375” or 1.500” (35 mm or 38 mm) pole diameters

AD-S282H and AD-S282HT:

includes socket head screws and washers for enhanced security

Specifications are subject to change without notice.

Summary of Contents for AD-S282H

















Search results

Summary of Contents for AD-S282H

Reviews:

Related manuals for AD-S282H

Brands by name

Popular brands

QSC AD-S282H, User Manual

Search results

Summary of Contents for AD-S282H

Reviews:

Related manuals for AD-S282H

Brands by name

Popular brands