background image

2

IMPORTANT SAFETY PRECAUTIONS 

& EXPLANATION OF SYMBOLS

1- Read these instructions.
2- Keep these instructions.
3- Heed all warnings.
4- Follow all instructions.
5- Clean only with a dry cloth.
6- Install in accordance with QSC Audio Product’s instructions and a licensed, professional engineer.
7- Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampli-

fiers) that produce heat.

8- Only use attachments/accessories from QSC Audio Products, Inc.
9- Use only with mounts or brackets specified by QSC Audio Products.
10- Refer all servicing to qualified personnel. Servicing is required when the apparatus has been damaged in any 

way.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of 
important operating and maintenance (servicing) instructions in this manual.

WARNING! Before placing, installing, rigging, or suspending any speaker product, inspect all hardware, 
suspension, cabinets, transducers, brackets and associated equipment for damage. Any missing, cor-
roded, deformed or non-load rated component could significantly reduce the strength of the installation, 
placement, or array. Any such condition severely reduces the safety of the installation and should be 
immediately corrected. Use only hardware which is rated for the loading conditions of the installation 
and any possible short-term unexpected overloading. Never exceed the rating of the hardware or equip-
ment. Consult a licensed, professional engineer when any doubt or questions arise regarding a physical 
equipment installation.

Warranty

 

(USA only; other countries, see your dealer or distributor)

Disclaimer

QSC Audio Products, Inc. is not liable for any damage to amplifiers, or any other equipment that is caused by negligence or 
improper installation and/or use of this loudspeaker product. 

QSC Audio Products 3 Year Limited Warranty

QSC Audio Products, Inc. (“QSC”) guarantees its products to be free from defective material and / or workmanship for a period of 
three (3) years from date of sale, and will replace defective parts and repair malfunctioning products under this warranty when the 
defect occurs under normal installation and use - provided the unit is returned to our factory or one of our authorized service sta-
tions via pre-paid transportation with a copy of proof of purchase (i.e., sales receipt). This warranty provides that the examination 
of the return product must indicate, in our judgment, a manufacturing defect. This warranty does not extend to any product which 
has been subjected to misuse, neglect, accident, improper installation, or where the date code has been removed or defaced. QSC 
shall not be liable for incidental and/or consequential damages. This warranty gives you specific legal rights. This limited warranty 
is freely transferable during the term of the warranty period.

Customer may have additional rights, which vary from state to state.

In the event that this product was manufactured for export and sale outside of the United States or its territories, then this limited 
warranty shall not apply. Removal of the serial number on this product, or purchase of this product from an unauthorized dealer, 
will void this limited warranty.
Periodically, this warranty is updated. To obtain the most recent version of QSC’s warranty statement, please visit www.qscau-
dio.com. 

Contact us at 800-854-4079 or visit our website at www.qscaudio.com.

© Copyright 2004, 2006 QSC Audio Products, Inc.

QSC® is a registered trademark of QSC Audio Products, Inc.

“QSC” and the QSC logo are registered with the U.S. Patent and Trademark Office

Speakon

®

 is a registered trademark of Neutrik AG, OmniMount

®

 is a registered trademark of OmniMount Systems, Phoenix, AZ, USA

Summary of Contents for AD-S282H

















Reviews: