XCubeSAN 3300
Hardware Manual
System Components Overview
© 2022 QSAN Technology, Inc. All rights reserved.
www.qsan.com
Official
Document
11
4
10 GbE iSCSI
(SFP+)
Port 2
5
10 GbE iSCSI
(SFP+)
Port 3
6
10 GbE iSCSI
(SFP+)
Port 4
7
Host Card Slot 1
(host card is an optional part)
8
Host Card Slot 2
(host card is an optional part)
9
Management Port
10
USB Port
11
Console Port
(3.5mm jack to RS232)
1
12
Service Port
(UPS)
2
13
Buzzer Mute Button
14
Reset to Factory Default Button
3
1
Console cable (NULL modem cable) connects from console port of the storage system to a RS 232 port on the
management PC. The console settings are on the following: Baud rate: 115,200, 8 data bit, no parity, 1 stop bit,
and no flow control; terminal Type: vt100.
2
System supports traditional UPS via a serial port and network UPS via SNMP. If using the UPS with a serial port,
connect the system to the UPS via the included cable for communication. (The cable plugs into the serial cable that
comes with the UPS.) Then set up the shutdown values for when the power goes out.
3
Press the button for 3 seconds to progress reset to defaults and force a reboot. The default settings are:
Reset
Management Port
IP address to DHCP, and then fix IP address: 169.254.1.234/16.
Reset admin’s
Password
to 1234.
Reset
System Name
to model name plus the last 6 digits of serial number. For example: XF2026-123456.
Reset IP addresses of all
iSCSI Ports
to 192.168.1.1, 192.168.2.1,
…
etc.
Reset link speed of all
Fibre Channel Ports
to Automatic.
Clear all access control settings of the host connectivity.
Please refer to the following for the definition of LED behavior.
