28
© Copyright 2017 QSAN Technology, Inc. All Right Reserved.
5.
If you accidentally leave the quick install page, you can always return to the setup page
by go through the steps above from step 1 again.
6.
After quick setup is finished, login to the QSM as
“
admin
”
(default account name) with
the password you set on former instructions.
INFORMATION:
1. The XCubeNAS must be connected to the Internet to install QSM with
Web Finder.
2. Both the XCubeNAS and your PC must be on the same local network.
3. If you cannot find your XCubeNAS, the default IP address for LAN 1 is
169.254.1.234.
4. If you expanded your memory earlier on, you can now check to make
sure the system recognizes the new memory capacity. You can check the
status by following steps:
a.
Login to QSM as
admin
or a user belongs to the
administrator
’
s
group.
b.
Find the memory status in
Monitor app
Hardware
.
If your system cannot recognize the expanded memory or failed to start
up, please check again and ensure the memory is properly installed.
