21
CAUTION:
Make sure the connector is fully inserted. Otherwise, the network
expansion card might not be able to function properly.
8.
Tighten the screws that you removed in step 5 and 6 to secure the newly inserted card.
9.
For thunderbolt 3.0 adapter card only, connect the cable from the adapter card to the
mainboard.
①
Align the connectors. Please make sure that the position is the same as the figure
shown below.
②
Push to connect the cable and the connectors.
10.
Slide to put back the top cover you removed in step 4, put back and tighten the screw on
the XCubeNAS.
INFORMATION:
(1)
If you want to purchase the optional adapter card, please contact your
nearest local reseller or visit QSAN official website:
https://qsan.com/location
(2)
See the recommended adapter
card on
Appendix: Recommended
Optional Module List
