XCubeNAS 8104 & 5104
Hardware Manual
Install System Hardware
© 2022 QSAN Technology, Inc. All rights reserved.
www.qsan.com
Official
Document
9
3.
I
NSTALL
S
YSTEM
H
ARDWARE
This chapter will guide you through the installation process.
3.1.
Basic System Installation
For basic system installation, please refer to the
downloaded from the website. You can learn to install the disk drives, optional host cards, rail
kits, and power on the storage system to discover and setup the system.
For more information about discovering your system and the initial configuration, please refer
to the
3.2.
Connecting the USB LCM (Option)
If you purchased the USB LCM, please use the enclosed USB extension cable (A-male to A-
female) to connect to the system. The Following procedures are for the USB LCM connection:
1.
Connect the USB LCM to the female side of the USB extension cable.
2.
Connect the male side of the USB extension cable to the USB port on the system front pillar.
