XCubeNAS 8104 & 5104
Hardware Manual
Overview of System Components
© 2022 QSAN Technology, Inc. All rights reserved.
www.qsan.com
Official
Document
4
Table 2-1 Descriptions of the System Controls and Indicators
NUMBER
DESCRIPTION
DEFINITION
1
USB Port
The USB port can be plug in the LCM
(LCD Module)
.
2
Enclosure Status LED
Enclosure Status LED indicates current health
status of the system.
Solid
Amber
:
1.
The storage folder / pool has reached its
maximum capacity (100%).
2.
The storage folder / pool is almost full
(95%).
3.
The system fan is out of function.
4.
A bad sector has been detected on the
hard drive.
5.
One of the pools is in degraded read-only
mode.
6.
Hardware self-test error. Examples
include PSU failed, abnormal voltage,
critical high / low temperature, any
cooling fan module failed or removed,
any pool failure.
Blinking
Amber
(interval of 0.5 sec):
Firmware is being upgraded, or RAID
rebuilding is in process.
Off: The system is healthy.
3
Enclosure Access LED
Enclosure Access LED indicates the host interface
connectivity.
Blinking
Blue
: The host interface activity is
on-going.
Off: There is no host interface activity.
4
Disk Drive Status LED
Solid
Amber
:
▪
When system is booting.
