Storage Management
Initial Setup
The Initial configuration wizard will guide the first time user to initialize and setup the system quickly.
Step 1
To access the XEVO web interface, you have to enter a username and
password. The initial defaults for the administrator login are:
- Username:
admin
- Password:
1234
Step 2
- Enter a system name.
- Change the admin’s password.
Step 3
- Select a Time Zone depending on your location.
- Set the local Date and Time. Date and time can be set by manually
or synchronized with a NTP (Network Tim e Protocol) server.
- Click the
Next
button to proceed.
After all configurations are set up, the system will redirect your page to the new IP address you just set for the management port. Then you have to
login with new admin password.
After initial setup, the next step is to configure the specific storage settings. To deploy your storage, you have to go to the Storage tab first.
Step 1
- Click the “
+
” icon at the left-top of the Storage tab to pop up a
Create Pool wizard.
Step 4
- Confirm or change the management port IP address and DNS server.
- Click the
Apply
button to complete the initial configuration.
Step 2
- Click the “
+
” button to add disks. The system will suggest the default
configurations depend on the amount of disks you have selected.
- Click the
Next
button to proceed.
Step 3
- Adjust the capacity of the volume to be created and select its block
size.
- Click the
Next
button to proceed.
Step 4
- Select a host group or leave the option
Forbid All Connections
and set it
later.
- Click the
Next
button to proceed.
