Qsan XCubeFAS Series Hardware Manual Download

Page: 28 / 110

XCubeFAS Series

Hardware Manual

System Components Overview

Official

Document

TIP:

Please plug-in any of the first four hard drives, then event logs can be
saved and displayed in next system boot up. Otherwise, the event logs
cannot be saved.

Rear Panel

In this session, we will describe the system control LEDs, PSU LEDs, host card LEDs, and the
cache-to-flash module LED in the rear panel.

2.2.1.

Controller LEDs

Please refer to the following content for definitions of the LED behaviors.

XF2026D

Figure 2-4 XF2026D Controller LEDs

Table 2-3 Descriptions of XCubeFAS Series Controller LEDs

NUMBER

DESCRIPTION

DEFINITION

Controller Status LED



Solid

Green

: Controller status is normal.



Solid

Red

: System is booting, or the

controller is failed.

Summary of Contents for XCubeFAS Series














































































































Search results

Summary of Contents for XCubeFAS Series

Reviews:

Related manuals for XCubeFAS Series

Brands by name

Popular brands

Qsan XCubeFAS Series, Hardware Manual

Search results

Summary of Contents for XCubeFAS Series

Reviews:

Related manuals for XCubeFAS Series

Brands by name

Popular brands