Qsan XCubeFAS Series Hardware Manual Download Page 26

Page: 26 / 110

XCubeFAS Series

Hardware Manual

System Components Overview

Official

Document

Enclosure Status
LED

Status LED

(Indicate current health status of the system.)



Solid

Amber

: System has errors including

PSU failure, abnormal voltage, abnormal

temperature, any fan module failed or

removed, controller degraded, pool

degraded, pool failure, SSD cache pool

degraded, or SSD cache pool failure.



Off: The system is healthy.

USB Port

The USB port can be plug in the LCM (LCD
Module).

2.1.2.

Disk Drive LEDs

Please refer to the following content for definitions of LED behaviors.

Figure 2-2 Disk Drive Indicators of SFF Disk Drive Tray

Table 2-2 Descriptions of Disk Drive LEDs

Summary of Contents for XCubeFAS Series














































































































Search results

Summary of Contents for XCubeFAS Series

Reviews:

Related manuals for XCubeFAS Series

Brands by name

Popular brands

Qsan XCubeFAS Series, Hardware Manual

Search results

Summary of Contents for XCubeFAS Series

Reviews:

Related manuals for XCubeFAS Series

Brands by name

Popular brands