Notices
iii
Safety Warnings
1.
The XCubeNAS can operate normally in the temperature of 0ºC~40ºC (31.99 ~ 103.99°F).
Please make sure the environment is well-ventilated.
2.
The power cord and devices connected to the XCubeNAS must provide a correct supply
voltage (100-240V~/ 5A-2.5A, 50-60Hz).
3.
Do not place the XCubeNAS in direct sunlight or near chemicals. Make sure the
temperature and humidity of the environment are in the optimized level.
4.
Place the product right side up at all times.
5.
Unplug the power cord and all connected cables before cleaning. Wipe the XCubeNAS
with a dry towel. Do not use chemical or aerosol to clean the NAS.
6.
Do not place any objects on the XCubeNAS for the server’s normal operation and to avoid
overheat.
7.
Use the screws provided in the product package to lock the hard disks in the XCubeNAS
when installing hard disks for proper operation.
8.
Do not place the XCubeNAS near any liquid.
9.
Do not place the XCubeNAS on any uneven surface to avoid falling off and damage.
10.
Do no place the XCubeNAS on the ground and do not step on the system to prevent any
potential damages.
11.
Make sure the voltage is correct in the location where the XCubeNAS is installed. Contact
the distributor or the local power supply company for the information.
12.
Do not place any object on the power cord.
13.
Do not attempt to repair the XCubeNAS in any occasions. Improper disassembly of the
product may expose the users to electric shock or other risks. For any inquiries, please
contact the distributor.
14.
To remove all electrical current from the device, ensure that all power cords are
disconnected from the power source.
15.
The XCubeNAS should only be installed in restricted access location such as in the
server room and maintained by the qualified service person. The server room is locked
by key or keycard, or other means of security access and only a qualified service person
is allowed to enter the server room.
