Qsan Technology XCubeNXT XN8000D Page 68 Hardware Manual Download

Page: 68 / 69

Termination

If User breaches any of its obligations under this EULA, QSAN may terminate this EULA and take
remedies available to QSAN immediately.

Miscellaneous



QSAN reserves the right to modify this EULA.



QSAN reserves the right to renew the software or firmware anytime.



QSAN may assign its rights and obligations under this EULA to any third party without
condition.



This EULA will be binding upon and will inure to User’s successors and permitted
assigns.



This EULA shall be governed by and constructed according to the laws of R.O.C. Any
disputes arising from or in connection with this EULA, User agree to submit to the
jurisdiction of Taiwan Shilin district court as first instance trial.

Summary of Contents for XCubeNXT XN8000D




































































Search results

Summary of Contents for XCubeNXT XN8000D

Reviews:

Related manuals for XCubeNXT XN8000D

Brands by name

Popular brands

Qsan Technology XCubeNXT XN8000D, Hardware Manual

Search results

Summary of Contents for XCubeNXT XN8000D

Reviews:

Related manuals for XCubeNXT XN8000D

Brands by name

Popular brands