2.
Put the battery into the receivers.
3.
Use a paper clip to double click the tiny button which inside of the Receiver 1 or
Receiver 2 (inside of re-set hole), you can see it after you take the battery cover
out from receivers. The LED indicated light which on the Receiver 1 or Receiver 2
will start blinking.
4.
Hold the Button 1 if you pair the Receiver 1. The Red LED indicated ligth will stay
on after pair the Receiver successfully with transmitter.
Hold the Button 4 if you pair the Receiver 2. The Red LED indicated ligth will stay
on after pair the Receiver successfully with transmitter.
Important Tips:
(Please Read)
1.
The valid distance of remote control means the straight-line distance between
the transmitter and the receiver without obstacles in between. If there are
interference signals or signal screening around, the actual remote control
distance may vary.
2.
The lifetime of the batteries vary according as how often you use the product.
Your first battery may not last as long as you expectation.
3.
The vibration function is for both receivers at the same time.
4.
This product is for pet training. Good effect can only be achieved after a period
of training.
5.
This product is a wireless transmitting device; you MUST NOT use the remote
control system in places like petrol stations or hospitals where mobile phones
are prohibited. Patients using heart pacemaker are forbidden to use this
product
.
6.
The Electrodes have to directly touch pet’s skin as it is very important to
effective training.
7.
This product is only for Pet Training, It is not a
Regula
r Pet Collar. Please
remove it from your pet at least 8 hours out of every 24 hours.
8.
The Device does not design only for water resistant, not fully waterproof.
9.
If you do not use the transmitter please take the battery out from transmitter
for saving battery life.
5
