Qooder QV3, User Manual, Page: 39 / 76

4
37
To avoid getting burnt, do
not unscrew the expansion tank
cap when the engine is still hot.
When topping up, use only
coolant with the specifi cations
listed in the “Products” section in
the “Technical Data” chapter.
fi g. 5
When the level of the liquid is below the
LOW reference mark, lift the foot rest mat
2 fi g. 5, remove cap 1 fi g. 5 of the tank 3
fi g. 5 and top up if necessary when the
engine is cold.
Brake oil
The level of the brake fl uid must be
checked through inspection holes on the
tanks, located on the right- and left-hand
sides of the handlebar.
Make sure that the level never drops
below the notch beneath the letter L fi g.
6 on the tank.
fi g. 6
Whenever the brake fl uid
level is at or below the minimum
level, have an authorised Quadro
Vehicles dealer or service centre
top it up.
The tank on the left-hand
handlebar refers to the total (front/
rear) brake system, while the tank
on the right-hand side refers to
the front brake system.