Qooder QV3, User Manual, Page: 32 / 76

30
USE
This chapter describes the main oper-
ations which must be performed and
some tips to adopt when preparing to
drive the QV3. IGNITION KEY
The ignition key fi g. 1 is located in the
upper part of the leg shield. The key can
be turned to the following positions, as
required:
1 - Steering lock (requires the key to be
pressed).
2 - OFF.
3 - ON.
4 - Seat opening.
If you are not able to start
the scooter, consult an authorised
Quadro Vehicles dealer.
fi g. 1
ENGINE START
Proceed as follows to start the scooter:
•
ensure that button A Fig. 2 is in
position 0;
•
when on, release the tilting lock;
•
turn the key to the position;
•
hold the accelerator at the idle
position;
•
pull one of the two brake levers on
the handlebar (or press the brake
pedal) and press the starter button
B fi g. 2.
fi g. 2