25
Built-in PC Interface
1.
Select PC signal source to enter PC interface. The following are three ways to select a signal source
channel.
Swipe your finger up from the bottom edge to bring up a toolbar then click
input
.
Press
SOURCE
button on the remote control.
Press
button on the front control panel.
In the signal source page, select a channel and press OK or click the channel icon directly to enter it.
2.
Operate the built-in PC just like operating an ordinary computer.
3.
Shut down PC before you press the button
on the front control panel to turn off the panel. Do not
power off a running PC suddenly to avoid data lose. Or you can press Power button to turn off PC and
panel at the same time.
Other Source Settings
When you switch to other signal sources like PC (OPS), HDMI, VGA and etc, settings interface will be
displayed as follows:
Picture
,
Sound
and
Setting
. Note that
TV setting is disabled.