22
Built-in PC Interface
1. Select PC signal source to enter the PC interface. The following three ways are used to
select a signal source channel.
Swipe your finger up from the bottom edge to bring up a toolbar then click
input
.
Press
SOURCE
button on the remote control.
Press
button on the front control panel.
In the signal source page, select a channel and press OK or click the channel icon directly to
enter it.
2. Operate the built-in PC just like operating an ordinary computer.
3. Shut down PC before you press the button
on the front control panel to turn off the panel.
Do not power off a running PC suddenly to avoid data lose.
